Keeping Your Battery Clean To Remain Safe

Have you ever made an effort to jump start your car battery and was shocked that it was covered in gunk? That particular gunk that spreads over the battery happens to be corrosion formed by acid condensation. You can easily clean this by using a simple chemical solution. Something as very basic as baking soda might quickly clean the battery acid. Maintaining your battery isn’t very difficult to do but you should take necessary precautions.

First off, you need to have the tools which you can locate easily at home. The basic tools you will need are a pair of safety glasses to protect your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. You will also need open-end and box wrenches, a good solid scraper either metal or plastic, cleaning brushes for the battery terminal along with a turkey baster or small funnel. It’s also necessary to have a pail of water,rubber gloves, spray-on household cleaner and some sponges or clean cloths. This might seem like a lot of things for cleaning a battery, but we did mention doing it safely.

A few of the corrosive build up possess sulfuric acid, so it is a wise idea to use the safety glasses to protect your eyes, and the rubber gloves for your hands. You’ll want to continue to keep this substance away from your car, mainly because it can eat away the paint. How much you must clean the battery is determined by how much corrosion it has. In order to totally remove the dirt and corrosion, you will need to take the battery out of the vehicle. For your initial cleaning, you use the scraper and the bristle brush to remove as much of the dirt and corrosion as you can.

The next thing to do will be to mix one tablespoon of baking soda together with one pint of water then use it to clean the battery and the cable connections using the turkey baster. After that you can use the bristle brush to loosen and remove the deposits from the battery and you want to remove the cables so that cleaning will be easier. You can take off the cables, beginning from negative first then positive, using the pliers and wrenches. For your terminals and additional parts, work with the brush again to remove the corrosion and do a flush using the baking soda solution.

So now use the liquid cleaner within the spray bottle, and a sponge to get rid of the remaining dirt and grease. After, dry every one of the parts and reassemble everything and be sure you hook up the cable with positive first. Lastly, be sure that everything is anchored and now you have a clean and safe battery.